Image Image Image Image Image
  • LATICRETE® 1776

  • LATICRETE® 1776 GROUT ADMIX PLUS
    LATICRETE® 1776 Grout Admix Plus is specially designed Latex Admix to be used with Sanded & Unsanded Grout.

    • 200 ml, 400 ml, 5 ltr and 20 ltr

    • Not Applicable

    • Not applicable

      • Colour fastness
      • Provides flexibility
      • Improves compressive strength
      • Reduces water absorption
    • When the tiles/ stones have set firm, spacers and bottom support can be removed.

      Use LATICRETE® 1776 Latex Admix with LATICRETE® 600 series / Aquashield Grout (available in a range of colours) when grout joints are less than 3 mm wide and LATICRETE® 500 series Sanded Grout Filler (available in a range of colours) for joints 3mm – 12mm.

      The Cement based colour joints are strong and are resistant to weather, cracking and discolouration. 

      Mixing Ratio:

      LATICRETE® 600 series Unsanded Grout/ Aqua Shield : LATICRETE® 1776

       10kg bag         : 3.75 ltr

      LATICRETE® Sanded Grout : LATICRETE® 1776

      10 kg bag             : 1.75 ltr

      Mix only enough material that can be used in 30 min or less. Clean up immediately before beginning next mix.

      When applying, the grout joints should be free of dirt, debris or tile spacers.  Sponge or wipe dust/dirt of tile faces and remove water standing in joints.  Pack joints full and free of voids with rubber grouting float.  Remove excess grout from tile faces using edge of rubber float and diagonal strokes (at 45° angle to direction of joints). When the joints have set, use a moist sponge to remove excess grout from the tile and joint. Use minimal water for clean up. Final clean up to remove any grout haze should be carried out within the next 12 – 24 hours.

    • It improves the performance of portland cement grouts for all types of ceramic tile, brick, marble, natural stone and agglomerate stone installations.